SPEAK TO A MEDICAL GAS SPECIALIST 954-725-1470 | Order History

SKU: 01612 Category: Tags: , , ,

Amico O-DISWAL-U-NIT Medical Nitrogen DISS Complete Wall Outlet Assembly

SKU: 01612

Amico O-DISWAL-U-NIT Medical Nitrogen DISS Complete Wall Outlet Assembly


in stock

In stock (can be backordered)

Build Your Custom Hose

Amico O-DISWAL-U-NIT Medical Nitrogen DISS Complete Wall Outlet Assembly

Outlets are manufactured with a 7-3/4″ (197 mm) length type K 1/2″ (12.7 mm) outside diameter (3/8″ [9.5 mm] nominal) size copper inlet pipe stub, which is silver brazed to the outlet body. The body is made of 1-5/16″ (33 mm) diameter, one piece brass construction. For positive pressure gas services, the outlet should be equipped with a primary and secondary check valve and the secondary check valve should be rated at a maximum of 200 psi (1,379 kPa) in the event the primary check valve is removed for maintenance. Outlet bodies are gas specific by indexing each gas service to a gas specific dual pin indexing arrangement on the respective identification module.

The latch-valve is D.I.S.S. (Diameter Index Safety System) and is only accept corresponding gas specific adapters.

All outlets are cleaned and degreased for medical gas service, factory assembled and tested.


  • Medical Nitrogen DISS Male Connection
  • 1/2″ (12.7mm) O.D. (3/8″ [9.5 mm] nominal) type” K” copper pipe rotates 360 deg. for entry from any angle
  • 200 PSI Max Pressure Rated
  • Cleaned for Medical Nitrogen Service
  • Flow rate exceeds the requirements of NFPA and CSA
  • Accepts quick connect gas specific adapters, or DISS Adapters depending on which front assembly is ordered
  • 100% Pressure testing of each outlet and cleaned for medical gas service
  • Indexed to eliminate interchangeability of gas services
  • Up to 1″ (25 mm) wall thickness adjustment
  • Universal rough-in assembly to accept Quick Connects or DISS front adapters. (Can be interchanged at any time)
  • Outlets are also available for M.R.I. use

Amico Medical Gas Outlets Manual

Amico Extended Latch Valve Assembly Specs

Additional information

Weight 3 lb
Dimensions 10 × 8 × 6 in


Manufacturer Part Number






Medical Hose Builder