SPEAK TO A MEDICAL GAS SPECIALIST 954-725-1470 | Order History

SKU: 10105 Category: Tag:

Amico VV-ISO-GL-07 Locking Isolation Valve – 3/4″

SKU: 10105


Available on backorder

Build Your Custom Hose

Amico VV-ISO-GL-07 Locking Isolation Valve 3/4″

The valve is 3 piece ball-type design with a brass forging body and a chrome-plated brass ball for sizes 1/2 Inch to 2-1/2 Inch (1.3 cm – 6.3 cm). Ball seats, stem seals and stem washer are Reinforced Teflon (PTFE), with Viton stem and flange O-rings. A blow-out proof stem is used and the valve has a maximum pressure rating of 600 psi [4,137 kPa]. Valves are operated by a lever-type handle requiring only a quarter turn from a fully open position to a fully closed position.

Ball valves are equipped with type “K” washed and degreased copper pipe stub extensions at both the inlet and outlet sides of the valve port to facilitate installation. Valves are designed in such a manner that it can be “swung out” during installation so as to prevent damage due to heat transfer during the brazing operation. Each valve assembly is washed and degreased for medical gas service. Pipe stub extensions are capped at both ends. The valve is supplied in a sealed plastic bag to prevent contamination prior to installation.

  • 3 piece design for ease of maintenance
  • 100% Pressure tested
  • Cleaned for medical gas service
  • Blow-out proof stem
  • Full-Port design
  • 4 bolt mounting
  • Gauge port with 1/8 inch NPT port
  • Specifications: NFPA 99 and CSA Z7369.1
  • Thread: 3/4 Inch
  • Length: 21 Inch
  • Pressure Rating: 600 psi
  • Material: Brass
SKU 10105 Category Tag

Additional information

Weight 2 lbs
Dimensions 6 × 6 × 6 in


Manufacturer Part Number




Medical Hose Builder