YOUR CART IS EMPTY
FAST SHIPPING & KNOWLEDGEABLE CUSTOMER SERVICE
SPEAK TO A MEDICAL GAS SPECIALIST 954-725-1470 | Order History
SKU: 10105
$125.00
backorder
Build Your Custom HoseAmico VV-ISO-GL-07 Locking Isolation Valve 3/4″
The valve is 3 piece ball-type design with a brass forging body and a chrome-plated brass ball for sizes 1/2 Inch to 2-1/2 Inch (1.3 cm – 6.3 cm). Ball seats, stem seals and stem washer are Reinforced Teflon (PTFE), with Viton stem and flange O-rings. A blow-out proof stem is used and the valve has a maximum pressure rating of 600 psi [4,137 kPa]. Valves are operated by a lever-type handle requiring only a quarter turn from a fully open position to a fully closed position.
Ball valves are equipped with type “K” washed and degreased copper pipe stub extensions at both the inlet and outlet sides of the valve port to facilitate installation. Valves are designed in such a manner that it can be “swung out” during installation so as to prevent damage due to heat transfer during the brazing operation. Each valve assembly is washed and degreased for medical gas service. Pipe stub extensions are capped at both ends. The valve is supplied in a sealed plastic bag to prevent contamination prior to installation.
Weight | 2 lb |
---|---|
Dimensions | 6 × 6 × 6 in |
Manufacturer | Amico |
Manufacturer Part Number | VV-ISO-GL-07 |
Condition | New |
Amico Medical Gas Outlets
Amico Manifolds
Amico Manifolds
Amico Manifolds
Amico Manifolds
Amico Manifolds
Amico Manifolds
Amico Manifolds
Corporate Address:
1533 SW 1st Way, Suite F19
Deerfield Beach, FL 33441
Office: 954-725-1470
Email for Medical Gas: [email protected] Email for Parts: [email protected]
Hours of Operation
Monday – Friday
8 AM to 4:30 PM